Share:


NA2-N20

  • Manufacturer : Panasonic

  • Product No : NA2-N20

  • Product type : General Purpose & Slim Body Area Sensor NA2-N SERIES

  • Number of beam channels : 20

  • Sensing height : 380 mm 14.961 in

  • NPN output

  • NPN open-collector transistor
    • Maximum sink current: 100 mA
    • Applied voltage: 30 V DC or less (between output and 0 V)
    • Residual voltage: 2 V or less (at 100 mA sink current)

  • 1 V or less (at 16 mA sink current)

  • Job indicator ON : 1.0 W or less

  • Job indicator OFF : 0.9 W or less

  • Net weight: 500 g approx.

  • Gross weight: 700 g approx.

  • Utilization category : DC-12 or DC-13

  • Output operation : ON when all beam channels are received (OFF when one or more beam channels are interrupted)

  • Short-circuit protection : Incorporated

  • Indicators

  • Emitting indicator: Green LED × 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting)

  • Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)

  • Operation indicator: Red LED (lights up when one or more beam channels are interrupted)

    Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)

  • Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)

  • * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the

    receiver blink simultaneously due to operation of the short-circuit protection circuit.

  • Response time : 10 ms or less (12 ms or less when the interference prevention function is used)

  • Sensing range : 5 m 16.404 ft

  • Beam pitch : 20 mm 0.787 in

  • Sensing object : ø30 mm ø1.181 in or more opaque object (completely beam interrupted objects)

  • Supply voltage : 12 to 24 V DC ±10 % Ripple P-P 10 % or less

  • Interference prevention function : Incorporated

    Test input (emission halt) function : Incorporated

  • Environmental resistance

  • Pollution degree : 3 (Industrial environment)

  • Protection : IP40 (IEC)



 Inquiry - NA2-N20