Manufacturer : Mitsubishi Electric

FX2NC-16EX

Input extension block

Application sequencer : FX1NC, FX3GC, FX2NC, FX3UC

mass : 0.15 Kg

Rated voltage : Internal power supply from the sequencer

power consumption : 2.2 W

Input specification :

Number of input points : 16 points

Input connection shape : connector

Input format : sink

Input signal voltage : DC 24 V + 20% - 15% ripple (pp) within 5%

Input impedance : 4.3 kO

Input signal current : 5 mA / 24 VDC

Input ON sensitivity current : 3.5 mA or more

Input OFF sensitivity current : 1.5 mA or less

Input response time : About 10 ms

Input signal format : No-voltage contact input or NPN open collector transistor

Input circuit insulation : Photocoupler insulation

Input operation display : LED ON when input is ON

Ambient temperature : 0 to 55 ° C. ... Operating -20 to 70 ° C. ... Save

Relative humidity : 35 to 85% RH (noncondensing).... in operation

Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2

Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 Ten times in each of X, Y, Z directions (80 minutes in total in total) The criterion is based on IEC 61131-2

Impact resistance : 147 m / s 2 , working time 11 ms, criterion for judgment three times in X, Y, Z directions by sine half-wave pulse is according to IEC 61131-2

Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 µs, rising 1 ns, with noise si

tor with period of 30 to 100 Hz